Project · Heritage District, Sunnyvale
Heritage District walkway
A new front walkway and a mature oak with no light on either. We buried a low-voltage run from a garage transformer, set eleven brass path lights at the step edges, three up-lights into the oak canopy and a photocell timer that follows sunset through the year.
Fixtures11 path · 3 up
System12V · 300W
On site2 days
TimerAstronomic
What was included
- Fixture plan on the landscape drawing
- Brass path lights, 2700K, at every step edge
- Three brass up-lights with glare shields on the oak
- Direct-burial cable, hub wiring for even brightness
- Transformer with astronomic timer and photocell
- New GFCI exterior receptacle by the porch
“The oak at night is now the reason people slow down on our street.”
§ 02
See how the work progresses.
Eight stages from a similar job, start to finish. Concept imagery.
01 · Daylight walkway
02 · Marked out
03 · Trench cut
04 · Cable laid
05 · Fixtures set
06 · Transformer wired
07 · First light
08 · Finished
§ 03
How it ran.
- Day 0
Dusk walk
Demo fixtures set along the path after sunset so the owners saw the effect first.
- Week 1
Plan
Fixture count and transformer size confirmed.
- Day 1
Trench
Cable buried along the bed edge, transformer mounted in the garage.
- Day 2
Aim
Fixtures aimed after dark, timer set to sunset minus ten minutes.
Planning an outdoor lighting job?
Read the service page or book a walk. Every scope is written the same day.
§ 04
More projects.
Panel · 200A · 4 weeksCherry Chase panel upgradeZinsco out, 200A meter-main in, heat pump ready.
Lighting · 3 layers · 3 daysBirdland kitchen lightingEight cans, three pendants, under-cabinet tape, two scenes.
EV · 48A · Half dayPonderosa EV chargerFull panel, no upgrade: load management did the job.
Rewiring · 4 circuits · 2 daysLakewood laundry circuitsDryer, washer, lights and a GFCI, all new copper.